All Activity

This stream auto-updates   

  1. Today
  2. Reasoning. I have a file server with Slackware running on a Pi4. I wanted to make the movies and TV Shows easily accessible on the TV without using a DVD or Blu ray player. It would give my wife and I a chance to sit and watch a show without much fuss. The latest show we are on is Sue Thomas F.B. Eye. The main character, Sue has been deaf from about the age of 4 years. She is adept at reading lips and learned to speak despite being deaf. https://en.wikipedia.org/wiki/Sue_Thomas:_F.B.Eye Hardware. The Pi4 is enclosed in a stripped out power supply that died on me. The fan still worked, so I wired it to the Pi on the 5v line. It runs at half the speed it was designed for, but that makes it run almost silent. With the heatsinks added, stays about 35C when idle and 50C when encoding video. Pi Networking. I have 2 Pi's connected via ethernet. One is on 192.168.2.5 with a gateway of 192.168.2.6, with the other on 192.168.2.6 with a gateway of 192.168.2.5. Essentially just a crossover network. The reason for this is running Kodi on Pi4 has choppy video, but is better at running video encoding. So I linked it to a Pi3 to run Kodi via a samba share from the Pi4. Used OSMC for the kodi interface. It was the distribution that was stable on my Pi and booted right to the Kodi interface. https://osmc.tv/download/ lsblk - List block devices dd status=progress if=osmc.img of=/devsdX Installing Slackware. Get sources https://sarpi.fatdog.eu/index.php?p=getslack root@mynixbox:/tmp# mkdir /slackarm root@mynixbox:/tmp# mount /dev/sdc1 /slackarm root@mynixbox:/tmp# cd /slackarm root@mynixbox:/slackarm# To download Slackware ARM 14.2, type the following at the command prompt: root@mynixbox:/slackarm# rsync -Prv --delete ftp.slackware.uk::slackwarearm/slackwarearm-14.2 . [FatDog says ...] DON'T forget the period "." at the end of the rsync command or it won't work! I made a directory called extras, under the /slackarm directory https://sarpi.fatdog.eu/index.php?p=rpi4getcurrent upgradepkg --install-new (for each of these packages, after finishing the main Slackware installation.) System Packages kernel_sarpi4-5.4.40-armv7l-1_slackcurrent_13May20_sp1.txz kernel-modules-sarpi4-5.4.40-armv7l-1_slackcurrent_13May20_sp1.txz sarpi4-boot-firmware-armv7l-1_slackcurrent_13May20_sp1.txz sarpi4-hacks-4.0-armv7l-1_slackcurrent_13May20_sp1.txz Partitioning example After mounting the sd card listed by the lsblk command, run cfdisk /dev/mmcblk0 to partition the card. mmcblk0 179:0 0 59.5G 0 disk |-mmcblk0p2 179:2 0 4G 0 part [SWAP] |-mmcblk0p3 179:3 0 55.3G 0 part / `-mmcblk0p1 179:1 0 150M 0 part root@slack-server:mark # df -h / Filesystem Size Used Avail Use% Mounted on /dev/root 55G 25G 28G 48% / mkfs.vfat /dev/mmcblk0p1 mkswap /dev/mmcblk0p2 Samba snippet [MediaServer.Movies] path = /mnt/media2/Movies/ writable = no browsable = yes read only = no guest ok = no public = no fstab snippet (Kodi) //192.168.2.5/MediaServer.Movies /mnt/Movies cifs noauto,users,username=mark,password=*********** 0 0 Script to connect to the wifi network mark@osmc:~$ cat /usr/bin/net.sh #!/bin/bash connmanctl enable wifi connmanctl connect wifi_HASH_managed_psk Systemd service file mark@osmc:~$ cat /lib/systemd/system/net.service [Unit] Description=Wifi network auto connect on boot After=http-time.service [Service] Type=simple Restart=always ExecStart=/bin/bash /usr/bin/net.sh [Install] WantedBy=multi-user.target Raspberry Pi 3 with Kodi (OSMC) installed https://ia801506.us.archive.org/2/items/img-20200511-173957/IMG_20200511_173313.jpg Shell of a power supply with a Raspberry Pi 4 inside https://ia801506.us.archive.org/2/items/img-20200511-173957/IMG_20200511_173352.jpg Power switch to Raspberry Pi 4 with the power button facing out through the grill https://ia601506.us.archive.org/2/items/img-20200511-173957/IMG_20200511_173437.jpg View the full article
  3. Yesterday
  4. Its was fun to lean some basic commands but way easy to work with and has worked with all that i have. I like Ubuntu Mata and before that was zorin and is still nice. What's everyone's flavor
  5. Anyone around from the old day living around these parts
  6. This has been a long and painful saga for us as we've had to sit helplessly by and wait for action to be taken on our Spring issue, which officially came out in April. Most of our sales come from Barnes and Noble, which remains in a mostly shut down state. For reasons unknown to us, magazines were unable to be included in their curbside service, so even our remaining Winter issues that were in the stores were unable to be sold. Add to that instances of distributors suspending payments due to the pandemic, and we find ourselves not even getting paid for remaining sales of the Autumn issue! All of this while having to pay all of OUR bills and even being subjected to a penalty charge for not being able to ship our new issue to the places that had ordered it and were now refusing to accept it. This has been a first class nightmare. But we digress. It took a very long time, but we've managed to get the Spring issues that were already printed with nowhere to go into stores that we normally wouldn't be found in. So rather than just trash them all, we thought we might as well run an experiment and see if maybe there's a market for us in these rather unusual locations. So you may now find us in supermarket chains like Kroger, Albertsons, Ralphs, and something called King Soopers. Here is an easy tool to help find 2600 in all of these places. Just type '2600' and your zip code to find the nearest location where we're being sold. Now, because of the way distributors work, this tool doesn't include some retail outlets or regions of the country where we're actually sold. So we urge you to continue to consult our master store list in order to know all of your options. Now that we've finally gotten to this point, we can begin the long recovery process and start working on our Summer issue, which will obviously be late. But the fact that there even IS a new issue to look forward to is something to celebrate. We are all still doing this mostly out of love and also because we're extremely stubborn. If you're looking for ways to help 2600, the best thing you can do is get a ticket to HOPE 2020, which is now a virtual conference and one we hope will make a lot of people happy. Please submit a talk idea or reach out to others who you think would give a good presentation. We will make sure all talks/panels are presented smoothly in either a pre-recorded or live setting from locations all over the world. Check out the HOPE website for more ways you can get involved, including workshops, technical skills, music, and more. Together we can turn disappointment into triumph. View the full article
  7. I read a few articles on this webpage page and I think your Norton Discount Codes blog is to an exceptional degree boggling and has brilliant information. Much thankfulness to you for your sharing.
  8. [Shopsocks5.com] Service Socks5 Cheap Check Socks5 Online http://shopsocks5.com/check/ This really useful site that checks if SOCKS5 are LIVE or DIE Another extremely useful thing is that it parses out SOCKS5 and ports if you copy paste a number of SOCKS5. You can check unlimited SOCKS5 a day, but check Limit 50 SOCKS5 at a time. Paste SOCKS5 into the box. You can click check Blacklist or no click Blacklist and click check Here is the image check SOCKS5 Contact: Skype: Shopsocks5 Email: admin@shopsocks5.com ICQ: 727362912
  9. NEW 'Off The Wall' ONLINE Posted 03 Jun, 2020 0:51:30 UTC The new edition of Off The Wall from 06/02/2020 has been archived and is now available online. "Off The Wall" - 06/02/2020 Download the torrent here View the full article
  10. Matchbox HPR Episode 2 – Equipment Hello all those in HPR land. This is Tony Hughes coming to you from Blackpool in the UK. I hope you are all keeping well at the current time of restrictions due to the Corona Virus. In this the second of my recordings talking about restoring of Matchbox and other Die-cast models, I am going to talk of the equipment you will find essential, and some other things that while at the start you could live without, as you get into the hobby you may find extremely useful. So the first thing you will need is a drill for drilling the posts out on the model, both to aid in dismantling them and if you plan to reassemble with the aid of small screws, to drill the hole in the post for tapping to accommodating the screws. This can be a hand held wired or cordless drill or if you have a workshop with a drill press, all the better as this can be used in several ways during the reassembly of the models. That is on my wish list as I don’t have one at the moment. Secondly you will need a set of modelling files for removing the burr on axles, to remove these and the plastic wheels of the base of the model to allow for repainting if required. Wire brushes for cleaning the remains of any paint that didn’t get removed by the paint stripper. Hemostat Clamp Tweezers or crocodile clips on a rod, for use to hold the model during spray painting Additionally, although you can start doing restorations without these, the following will become very useful to help save time and achieve better finishes of the completed restoration. Rotary Tool, the most well known is the Dremel but there are many other manufacturers of similar tools at more economic cost. However beware you do get what you pay for and you may find buying the cheapest you can find a false economy. My cheap Lidl rotary tool which I have had for a few years but barely used, failed after 5 months of use a few weeks ago. The chuck ring thread striped and it will no longer hold bits in the chuck. The rotary tool makes the removal of the axles a very quick job, and cleaning paint stripped castings with a wire rotary brush is a breeze. Another thing you may find useful is a small spray booth with an extractor fan and filter for removing over-spray from the area you are painting in if doing this indoors, particularly if your workshop is in the house. Although one YouTube modeller I follow sprays his models on the cooker with the cooker extractor fan on to achieve a similar result when painting indoors. Finally you may wish to put a compressor and spray gun on your wish list if you get hooked as this gives you a far better range of colours you can paint in, as you can mix your own shades. Some in this community are sticklers for trying to get an exact match to the original colour of the model, others like me at the moment are happy to use shop bought spray paint cans. Small table vice for holding the model. A set of helping hands for the same during painting, particularly when painting fine details. So that’s the tools, now the consumables: Gloves – Rubber washing up gloves to protect from some of the chemicals used to strip paint. Latex gloves for using when spray painting as you have more control while wearing these rather than the looser fitting rubber washing up gloves. Work gloves to use when drilling or using other tools. Paint face mask to prevent inhaling fumes. Paint stripper, I use B&Q’s DIAL own brand paint stripper. I also use caustic soda for the same thing, occasionally one will work when the other failed to remove the paint, it depends on the original paint applied to the model. Model filler for repairing dents in the casting Wire wool and several grades of wet and dry sanding paper to smooth models after filler has been used. Super glue, useful for repairs where a quick setting medium is needed. Cans of spray paint to repaint the model, both primer and the final colour. You may also want a can or two of a clear coat to give that extra protection after painting or giving a gloss finish if the paint was a matt or satin finish. Not essential at the start but I also use a UV resin glue that cures very quickly after exposure to a UV light torch, this can be added and cured in layers if needed and remains flexible so can be useful for repairs on cables as well as my modelling. Finally you need your first model to start work on, these can be found in charity shops, online auction sites or maybe in your loft or garage if you have any of your childhood models kicking around needing to be re-loved. Later in the series I’ll talk about other things you may add to the consumables list as you get more into the hobby. So that’s it for this episode. In the next episode I’ll talk you through me dismantling a model for restoration. This is Tony Hughes for HPR signing off for this episode. Keep safe and I’ll be back soon. View the full article
  11. Last week
  12. The NATO phonetic alphabet. Play this a few times until it's ingrained in your memory banks. It'll change the way you communicate. Wikipedia View the full article
  13. http://Vn5socks.net - Service Seller Socks Good - Socks 5 VIP - Pass Paypal Blacklist Example daily 30: It is allowed to get maximium 30 socks for a day. If do not get them you will lose 30 socks in a day ( no incremental socks). An account will be expired after 30 days Payment Methods - PLEASE LOGIN TO PLACE ORDER - Auto payment Perfect Money - PM - Auto payment WebMoney - WMZ - Auto update socks new 24/24 - How to get socks5? -> After buy a package -> Click login -> Click VIEWSOCK -> Click ***.***... to get socks5! -> Contact: Skype: vn5socks.net - ICQ: 673820903 Welcome to http://Vn5socks.net
  14. New hosts There were no new hosts this month. Last Month's Shows Id Day Date Title Host 3065 Fri 2020-05-01 The case for the unattributed message Ahuka 3066 Mon 2020-05-04 HPR Community News for April 2020 HPR Volunteers 3067 Tue 2020-05-05 Getting my Python3 code working in Python2 MrX 3068 Wed 2020-05-06 Keeping track of downloads in Elm tuturto 3069 Thu 2020-05-07 Linux Inlaws S01E05 Porn and Skynet monochromec 3070 Fri 2020-05-08 making vim xdg compatible crvs 3071 Mon 2020-05-11 Bash snippet - quotes inside quoted strings Dave Morriss 3072 Tue 2020-05-12 The joy of pip-tools and pyenv-virtualenv clacke 3073 Wed 2020-05-13 Matchbox and Diecast Restoration Tony Hughes AKA TonyH1212 3074 Thu 2020-05-14 For your consideration - Escape Pod Ken Fallon 3075 Fri 2020-05-15 Federated Blogging with WriteFreely Ahuka 3076 Mon 2020-05-18 Keep calm and Virion Dave Morriss 3077 Tue 2020-05-19 Video conference Push to Talk DanNixon 3078 Wed 2020-05-20 Coronavirus Update 2020-05-07 Ahuka 3079 Thu 2020-05-21 Linux Inlaws S01E06 Porn and Trump monochromec 3080 Fri 2020-05-22 Ansible ping Ken Fallon 3081 Mon 2020-05-25 Why do formal verification? tuturto 3082 Tue 2020-05-26 RFC 5005 Part 1 – Paged and archived feeds? Who cares? clacke 3083 Wed 2020-05-27 Mumbling while on lockdown Dave Morriss 3084 Thu 2020-05-28 AudioBookClub 18 - Star Trek: The Continuing Mission Thaj Sara 3085 Fri 2020-05-29 Architectures of Robust Openness Ahuka Comments this month These are comments which have been made during the past month, either to shows released during the month or to past shows. There are 29 comments in total. Past shows There are 8 comments on 4 previous shows: hpr3013 (2020-02-19) "Bash Tips - 21" by Dave Morriss. Comment 3: nobody on 2020-05-22: "awk" Comment 4: Dave Morriss on 2020-05-22: "Response to 'nobody' re awk" hpr3053 (2020-04-15) "AudioBookClub 17 - Blood Witness" by HPR_AudioBookClub. Comment 2: mordancy on 2020-05-28: "Blood Witness" hpr3059 (2020-04-23) "A quick intro to Snapcast" by DanNixon. Comment 1: Windigo on 2020-05-01: "Thanks for the introduction" hpr3063 (2020-04-29) "Pens, pencils, paper and ink - 1" by Dave Morriss. Comment 1: Archer72 on 2020-05-05: "Fountain pens" Comment 2: Bookewyrmm on 2020-05-07: "Pens, ink and paper" Comment 3: Dave Morriss on 2020-05-07: "To Archer72" Comment 4: Dave Morriss on 2020-05-07: "To Bookewyrmm" This month's shows There are 21 comments on 11 of this month's shows: hpr3065 (2020-05-01) "The case for the unattributed message" by Ahuka. Comment 1: brian in ohio on 2020-05-01: "enemies" hpr3066 (2020-05-04) "HPR Community News for April 2020" by HPR Volunteers. Comment 1: tuturto on 2020-05-04: "Thanks" Comment 2: Dave Morriss on 2020-05-05: "No problem" Comment 3: clacke on 2020-05-06: "Blood type distribution" Comment 4: Ahuka on 2020-05-06: "I loved the show" Comment 5: Dave Morriss on 2020-05-06: "Re: Blood type distribution" Comment 6: Dave Morriss on 2020-05-06: "Thanks Ahuka" hpr3069 (2020-05-07) "Linux Inlaws S01E05 Porn and Skynet" by monochromec. Comment 1: Bendy on 2020-05-12: "skynet" hpr3071 (2020-05-11) "Bash snippet - quotes inside quoted strings" by Dave Morriss. Comment 1: nobody on 2020-05-22: "Further simplifying" Comment 2: Dave Morriss on 2020-05-22: "To 'nobody' re ANSI-C quoting" hpr3072 (2020-05-12) "The joy of pip-tools and pyenv-virtualenv" by clacke. Comment 1: clacke on 2020-04-30: "Errata: Ubuntu Python virtualenv works just fine" Comment 2: tuturto on 2020-05-12: "Interesting and insightful" hpr3073 (2020-05-13) "Matchbox and Diecast Restoration" by Tony Hughes AKA TonyH1212. Comment 1: tuturto on 2020-05-13: "sounds good" Comment 2: Tony Hughes on 2020-05-14: "Feedback from Tuturto" hpr3075 (2020-05-15) "Federated Blogging with WriteFreely" by Ahuka. Comment 1: clacke on 2020-05-01: "Federated link for talk on federated things" hpr3077 (2020-05-19) "Video conference Push to Talk" by DanNixon. Comment 1: Ken Fallon on 2020-05-19: "Brilliant Idea" Comment 2: jezra on 2020-05-19: "an amazing mix of custom hardware and software" hpr3078 (2020-05-20) "Coronavirus Update 2020-05-07" by Ahuka. Comment 1: Zen_floater2 on 2020-05-22: "my magical forrest Atheist comments." hpr3083 (2020-05-27) "Mumbling while on lockdown" by Dave Morriss. Comment 1: DanNixon on 2020-05-29: "Groove based tape format" Comment 2: MrX on 2020-05-31: "Re Groove based tape format" hpr3084 (2020-05-28) "AudioBookClub 18 - Star Trek: The Continuing Mission" by Thaj Sara. Comment 1: Ahuka on 2020-05-28: "Missing Fifty" Mailing List discussions Policy decisions surrounding HPR are taken by the community as a whole. This discussion takes place on the Mail List which is open to all HPR listeners and contributors. The discussions are open and available on the HPR server under Mailman. The threaded discussions this month can be found here: http://hackerpublicradio.org/pipermail/hpr_hackerpublicradio.org/2020-May/thread.html Events Calendar With the kind permission of LWN.net we are linking to The LWN.net Community Calendar. Quoting the site: This is the LWN.net community event calendar, where we track events of interest to people using and developing Linux and free software. Clicking on individual events will take you to the appropriate web page. Any other business Tags and Summaries Thanks to the following contributor for sending in updates in the past month: Dave Morriss Over the period tags and/or summaries have been added to 9 shows which were without them. If you would like to contribute to the tag/summary project visit the summary page at https://hackerpublicradio.org/report_missing_tags.php and follow the instructions there. View the full article
  15. Hello friends, as you all know, the role of botnet and ddos, which we talked about in the internet industry, is very big. With 700gbit power, I serve you as a rental if you want to buy it completely. It is forbidden to use arbitrary. It should be used for illegal illegal sites. What can you do with botnet and ddos? can close web sites and game servers, you can hit your site with botnet, you can increase your competitor's ads to high balances with botnet, by doing anti-seo, they can make them fall from google, you can increase the number of visitors of your own website and put it on the top of google, and you can keep your target site closed for days. You can have both ddos and botnet to be divided into two as botnet and ddos for sale and rent. You can also buy ... NOTICE: Payments We Only Accept Bitcoin Payment. Friends .. You Can Reach Me To Attack Monthly And Lifetime. I don't give information about the price. You Can Watch My Videos Below According To Everyone's Budget. I can try to do something. Contact Telegram: @rootzeynus Our Telegram Group Address: https://t.me/ddossatmak Our Attack Videos .. STRESS VIP DDOS! Watch: https://youtu.be/xh3qDy1FDw4 Watch: https://youtu.be/bCYCdHfuMuc Watch: https://youtu.be/yOPNyMloa7w Watch: https://youtu.be/raTbAgc_oyA Watch: https://youtu.be/eDTEpOckAD0 Watch: https://youtu.be/ADkJ7KtMI6o Watch: https://youtu.be/ql0rEwmAoOI Watch: https://youtu.be/-WGbcdTbXvU Watch: https://youtu.be/whoTALmK0Kc Watch: https://youtu.be/IsNfzogwqB8 Watch: https://youtu.be/Voc7U6jtV1M Watch: https://youtu.be/8cyORKJJe0A Watch: https://youtu.be/HCGuFrsMvzs Watch: https://youtu.be/Kc0Zb4LcbcM Watch: https://youtu.be/o-6u9SQNnws
  16. Hello friends, as you all know, the role of botnet and ddos, which we talked about in the internet industry, is very big. With 700gbit power, I serve you as a rental if you want to buy it completely. It is forbidden to use arbitrary. It should be used for illegal illegal sites. What can you do with botnet and ddos? can close web sites and game servers, you can hit your site with botnet, you can increase your competitor's ads to high balances with botnet, by doing anti-seo, they can make them fall from google, you can increase the number of visitors of your own website and put it on the top of google, and you can keep your target site closed for days. You can have both ddos and botnet to be divided into two as botnet and ddos for sale and rent. You can also buy ... NOTICE: Payments We Only Accept Bitcoin Payment. Friends .. You Can Reach Me To Attack Monthly And Lifetime. I don't give information about the price. You Can Watch My Videos Below According To Everyone's Budget. I can try to do something. Contact Telegram: @rootzeynus Our Telegram Group Address: https://t.me/ddossatmak Our Attack Videos .. STRESS VIP DDOS! Watch: https://youtu.be/xh3qDy1FDw4 Watch: https://youtu.be/bCYCdHfuMuc Watch: https://youtu.be/yOPNyMloa7w Watch: https://youtu.be/raTbAgc_oyA Watch: https://youtu.be/eDTEpOckAD0 Watch: https://youtu.be/ADkJ7KtMI6o Watch: https://youtu.be/ql0rEwmAoOI Watch: https://youtu.be/-WGbcdTbXvU Watch: https://youtu.be/whoTALmK0Kc Watch: https://youtu.be/IsNfzogwqB8 Watch: https://youtu.be/Voc7U6jtV1M Watch: https://youtu.be/8cyORKJJe0A Watch: https://youtu.be/HCGuFrsMvzs Watch: https://youtu.be/Kc0Zb4LcbcM Watch: https://youtu.be/o-6u9SQNnws
  17. [Shopsocks5.com] Service Socks5 Cheap Check Socks5 Online http://shopsocks5.com/check/ This really useful site that checks if SOCKS5 are LIVE or DIE Another extremely useful thing is that it parses out SOCKS5 and ports if you copy paste a number of SOCKS5. You can check unlimited SOCKS5 a day, but check Limit 50 SOCKS5 at a time. Paste SOCKS5 into the box. You can click check Blacklist or no click Blacklist and click check Here is the image check SOCKS5 Contact: Skype: Shopsocks5 Email: admin@shopsocks5.com ICQ: 727362912
  18. Social networks can be attacked by people who want to cause abuse and disruption, and one way to deal with that is to lock down the membership. But that goes against the idea of social, which should include being open to welcoming strangers. Mark Miller presents an analysis of how you can be both secure and welcoming which focuses on Object Capabilities. https://www.zwilnik.com/?page_id=1107 Links: https://redaktor.me/apconf/ https://archive.org/details/apconf-mark https://en.wikipedia.org/wiki/Project_Xanadu https://en.wikipedia.org/wiki/Miller_columns https://en.wikipedia.org/wiki/E_(programming_language) https://en.wikipedia.org/wiki/Caja_programming_language https://en.wikipedia.org/wiki/Foresight_Institute https://www.synopsys.com/blogs/software-security/polaris-software-integrity-platform/ http://www.cs.jhu.edu/~seaborn/plash/html/ https://en.wikipedia.org/wiki/Bitfrost https://en.wikipedia.org/wiki/Security_Content_Automation_Protocol https://alanhkarp.com/scoopfs/index.html https://en.wikipedia.org/wiki/Secure_Scuttlebutt https://en.wikipedia.org/wiki/Fediverse https://www.zwilnik.com/?page_id=1107 View the full article
  19. HOPE 2020 will take place online from July 25 through August 2, 2020. Hackers from all corners of the world will convene virtually for nine days of online presentations from a wide variety of sources. You can be one of them! We want as many elements of the hacker community as possible to be a part of this historic event. You too can give a talk or be part of a panel. While we all would prefer to be there in person, this provides an opportunity for anyone to share their ideas from wherever they happen to be. Simply email your talk proposal to speakers@hope.net. You should include a proposed title, an abstract, and a short bio for each speaker. Provide enough information so it is clear why HOPE attendees would find your topic interesting, new, and relevant. Make it clear why YOU are the right person or people to give this presentation. Most speaker/panel sessions will be allotted 40 minutes for the session, and then 10 minutes for live Q&A. If your talk is accepted, we will provide full assistance in getting it ready for your timeslot, whether you choose to pre-record or present your talk live. All types of presentations are encouraged, from solo talks to panels, debates, demonstrations, and interactive discussions. Presenters must consider the viability of their session for an entirely online presentation method. Your presentation can be made in ANY language or dialect. Please submit the abstract and biography in English, though, since that is the language that HOPE uses to communicate with presenters and attendees. If you intend to give your presentation in a language other than English, please mention this in your talk proposal. Submissions should highlight their relevance to hacking. They should be original, and not previously presented. We encourage presenters from all age groups and backgrounds. HOPE is an inclusive event, seeking civil discourse and education on all topics related to the hacker world. HOPE encourages all approaches and interpretations to hacking, presented by hackers, makers, developers, teachers, learners, and experimenters. If you have a passion for discovering how things work and sharing that knowledge, you have the hacker spirit. Some topics from past HOPE events, and new topics of interest, include: - Hacker approaches to fighting 2020's massive health and social challenges - Information, disinformation, and information literacy - Technologies, along with their benefits and risks - Social engineering - Education - Hacker culture and lifestyles - Effecting social change - Industry, government, commerce, and multinationals - Science, engineering, and math - Body modification, hacking, and enhancement - Phones, networks, and telecommunication - Hardware and software - Secrets and disclosures - Data, privacy, encryption, and policy - Outer space and beyond - How-to's / DIY (for beginners or any level) ...and much, much more All submissions will receive an automated response. (You won't get multiple responses if you email us more than once in a short period of time, but we will still get your email.) Notices of acceptance will be mailed out in the weeks ahead. Send all submissions to speakers@hope.net. All speakers will be given full access to the conference, which includes Q&A sessions with each presenter, a commemorative conference t-shirt that will only be given to conference attendees, and a special HOPE 2020 badge. If you want to help with coordinating this historic event, send an email to volunteers@hope.net. *** HOPE 2020 - July 25 to August 2, 2020 - Everywhere *** View the full article
  20. http://Vn5socks.net - Service Seller Socks Good - Socks 5 VIP - Pass Paypal Blacklist Example daily 30: It is allowed to get maximium 30 socks for a day. If do not get them you will lose 30 socks in a day ( no incremental socks). An account will be expired after 30 days Payment Methods - PLEASE LOGIN TO PLACE ORDER - Auto payment Perfect Money - PM - Auto payment WebMoney - WMZ - Auto update socks new 24/24 - How to get socks5? -> After buy a package -> Click login -> Click VIEWSOCK -> Click ***.***... to get socks5! -> Contact: Skype: vn5socks.net - ICQ: 673820903 Welcome to http://Vn5socks.net
  21. Earlier
  22. NEW 'Off The Hook' ONLINE Posted 28 May, 2020 1:10:58 UTC The new edition of Off The Hook from 05/27/2020 has been archived and is now available online. An apology for last week's show, fundraising show, Greg Newby, Aestetix & Mitch Altman join via Skype to discuss the plans for the upcoming virtual HOPE conference, The Hacker Digest lifetime subscription, three-year subscription to 2600 Magazine, the hacker tote bag. "Off The Hook" - 05/27/2020 Download the torrent here View the full article
  23. In this episode, the HPR_AudioBookClub discusses Star Trek The Continuing Mission created by Sebastian Prooth and Andy Tyrer. Non-Spoiler Thoughts Thaj misses Star Trek, and this made me realize that (this has since changed) Voice acting is very good. It's hard to translate things like starship combat into an audio drama. Background sounds really sell the structure of these episodes as Star Trek. This proves that an abundance of canon is not a reason to reboot things. This finds a niche in an unexplored part of the timeline and works. The warp sound effect for jumping to warp is weird. We think LostnBronx should write a StarDrfiter Audiodrama for us to produce. Beverage Reviews As usual, the HPR AudioBook Club took some time to review the beverages that each of us were drinking during the episode Thaj: Water and something from Kroger that I think resembles chocolate ice cream. x1101: Throwback style Mt. Dew made with real, diabetes inducing, sugar pokey: Led Light Bulbs....wait what?!?! FiftyOneFifty: Johnny Walker Black Things We talked about Recasting the captain was a bad idea. Thaj hates Cthulhu episodes of scifi shows. Which Star Trek is the best (the correct answer is DS9) Star Trek as an allegory for the real world. Pokey doesn't like time travel in Star Trek. And...we're back on DS9 We geek about the different types of ships in Trek. Since we didn't talk about the audio drama that much, we did actually like it. Our Next Audiobook Tincture, An Apocalyptic Proposition The Next Audiobook Club Recording Right now we are working through a backlog of older episode that have already been recorded. Once that ends we fully anticipate recording new episodes with listener participation. Further Recommendations Stirling Engines Nathan Lowell Pokey wouldn't mind a few cyborg modifications Peter F. Hamilton Lock Picking [I Don't want to live on this planet anymore](a href="http://cs608829.vk.me/v608829353/ac55/QTzYhbf8oUc.jpg) Cory Doctrow's "Makers" 3D printed metal dice Ace of spaces credit card bottle opener Dice Ice Doormat Feedback Thank you very much for listening to this episode of the HPR AudioBookClub. We had a great time recording this show, and we hope you enjoyed it as well. We also hope you'll consider joining us next time we record a new episode. Please leave a few words in the episode's comment section. As always; remember to visit the HPR contribution page HPR could really use your help right now. Sincerely, The HPR Audiobook Club P.S. Some people really like finding mistakes. For their enjoyment, we always include a few. Our Audio This episode was processed using Audacity. We've been making small adjustments to our audio mix each month in order to get the best possible sound. Its been especially challenging getting all of our voices relatively level, because everyone has their own unique setup. Mumble is great for bringing us all together, and for recording, but it's not good at making everyone's voice the same volume. We're pretty happy with the way this month's show turned out, so we'd like to share our editing process and settings with you and our future selves (who, of course, will have forgotten all this by then). We use the "Truncate Silence" effect with it's default settings to minimize the silence between people speaking. When used with it's default (or at least reasonable) settings, Truncate Silence is extremely effective and satisfying. It makes everyone sound smarter, it makes the file shorter without destroying actual content, and it makes a conversations sound as easy and fluid during playback as it was while it was recorded. It can be even more effective if you can train yourself to remain silent instead of saying "uuuuummmm." Just remember to ONLY pass the file through Truncate Silence ONCE. If you pass it through a second time, or if you set it too aggressively your audio may sound sped up and choppy. Next we use the "Compressor" effect with the following settings: Threshold: -30db Noise Floor: -50db Ratio: 3:1 Attack Time: 0.2sec Decay Time: 1.0 sec "Make-up Gain for 0db after compressing" and "compress based on peaks" were both left un-checked. After compressing the audio we cut any pre-show and post-show chatter from the file and save them in a separate file for possible use as outtakes after the closing music. We adjust the Gain so that the VU meter in Audacity hovers around -12db while people are speaking, and we try to keep the peaks under -6db, and we adjust the Gain on each of the new tracks so that all volumes are similar, and more importantly comfortable. Once this is done we can "Mix and Render" all of our tracks into a single track for export to the .FLAC file which is uploaded to the HPR server. At this point we listen back to the whole file and we work on the shownotes. This is when we can cut out anything that needs to be cut, and we can also make sure that we put any links in the shownotes that were talked about during the recording of the show. We finish the shownotes before exporting the .aup file to .FLAC so that we can paste a copy of the shownotes into the audio file's metadata. At this point we add new, empty audio tracks into which we paste the intro, outro and possibly outtakes, and we rename each track accordingly. Remember to save often when using Audacity. We like to save after each of these steps. Audacity has a reputation for being "crashy" but if you remember save after every major transform, you will wonder how it ever got that reputation. View the full article
  24. It's okay, can help to know the soft better. But I was the first to find that Crypton was listed on the trading platform https://www.qbtc.me/trade?symbol=CRP_USDT And that's great news, I think. The price is too low still, but bigger popularity will help it rise.
  25. [Shopsocks5.com] Service Socks5 Cheap Check Socks5 Online http://shopsocks5.com/check/ This really useful site that checks if SOCKS5 are LIVE or DIE Another extremely useful thing is that it parses out SOCKS5 and ports if you copy paste a number of SOCKS5. You can check unlimited SOCKS5 a day, but check Limit 50 SOCKS5 at a time. Paste SOCKS5 into the box. You can click check Blacklist or no click Blacklist and click check Here is the image check SOCKS5 Contact: Skype: Shopsocks5 Email: admin@shopsocks5.com ICQ: 727362912
  26. Introduction Two HPR hosts based in Edinburgh got together over Mumble to have a chat during the COVID-19 lockdown. MrX Dave Morriss Apology Dave’s sound was a bit distorted in this recording. Having had recent problems using the Zoom recorder as a microphone, this time the in-built microphone was resorted to, with even worse results it turned out. See the Sound processing section below if you want to know more. Notes Some of the topics we discussed Locations for recording. Ambient noises. WiFi versus ethernet. Dave has a 5-port switch on his dining table (not 8-port). ADSL routers Linksys NSLU2 "SLUG" SheevaPlug CUPS - printing and scanning with old non-networked printers Legacy computing experiences: Diablo exchangeable disks Line printers. Fan-fold 132 column paper Punched card experiences. Card sequence numbers. Card sorters. Checking disks for warped platters Magnetic tapes; recovering from damage. 8-track tapes Museum of Communication, Fife Strowger switch electromechanical stepping switch telephone exchange system Links Linksys NSLU2 SheevaPlug CUPS - Common Unix Printing System Museum of Communication, Burntisland, Fife Sound processing The recording was made in multichannel mode in anticipation of problems. The distorted channel was processed by using the Clip Fix effect in Audacity, which didn’t seem to change much except reduce the sound level. It was also necessary to find and remove sounds produced by the push to talk key presses. Removal meant replacing these sounds by silence so the two channels would not get out of step. After this the two channels were merged together and silences truncated. Lessons learned: don’t use a built-in microphone if you can help it! View the full article
  27. NEW 'Off The Wall' ONLINE Posted 26 May, 2020 23:58:56 UTC The new edition of Off The Wall from 05/26/2020 has been archived and is now available online. "Off The Wall" - 05/26/2020 Download the torrent here View the full article
  28. http://Vn5socks.net - Service Seller Socks Good - Socks 5 VIP - Pass Paypal Blacklist Example daily 30: It is allowed to get maximium 30 socks for a day. If do not get them you will lose 30 socks in a day ( no incremental socks). An account will be expired after 30 days Payment Methods - PLEASE LOGIN TO PLACE ORDER - Auto payment Perfect Money - PM - Auto payment WebMoney - WMZ - Auto update socks new 24/24 - How to get socks5? -> After buy a package -> Click login -> Click VIEWSOCK -> Click ***.***... to get socks5! -> Contact: Skype: vn5socks.net - ICQ: 673820903 Welcome to http://Vn5socks.net
  29. This conversation took almost an hour, so I split it into two shows: Part 1 talks mostly about the RFC itself, what it means and why. Part 2 goes into personal experiences with the RFC and with syndication in general, in particular in the context of web comics. This is part 1. The why When serving most RSS/Atom feed readers today, you have to choose: Do you make a complete feed with all the things you ever published, or do you make a shorter feed with just the latest entries? This is a trade-off with pros and cons, and it seems like a trade-off you have to make, but a solution to let your Atom feed have the cake and eat it too existed already 13 years ago, if only any of our feed readers would adhere to it: RFC 5005, Feed Paging and Archiving The what https://tools.ietf.org/html/rfc5005 was published in September 2007 The XML namespace for RFC 5005 elements is http://purl.org/syndication/history/1.0, aliased as fh below. Section 2 defines the complete feed: It is one document (Atom file) that contains the entire set the feed describes. The document is marked with an fh:complete element. Section 3 defines the paged feed: It is a series of documents connected with Atom link elements with rel set to the link relations first, last, previous or next. Section 4 defines the archived feed: It has a subscription document that may change at any time, and a series of archive documents that are expected to have stable contents and URIs. The link relations defined are current, prev-archive and next-archive. The semantics are clearer: prev-archive refers to previously published entries, and because the contents are stable you can stop when you see a URI to a document you already have. Archive documents are marked with the fh:archive element. The who In this show I’m talking to: fluffy Federated social web: https://queer.party/@fluffy Writes and makes things in several creative fields: https://beesbuzz.biz/ Publ is like a static site generator, but dynamic. It produces RFC 5005 archive feeds, of course: http://publ.beesbuzz.biz/ Thoughts on ephemeral content vs content worth archiving and how they relate to protocols: https://beesbuzz.biz/blog/5709-Keeping-it-personal Jamey Federated social web: https://toot.cat/@jamey Blog: http://minilop.net/ Made a prototype full-history reader that follows RFC 5005 links: http://reader.minilop.net/ Made a webcomic reader mostly mentioned in Part 2: https://www.comic-rocket.com/ Made a WordPress plugin implementing RFC 5005: https://github.com/jameysharp/wp-fullhistory Made an RFC 5005 archive feed synthesizer for sites with a predictable post frequency and URL structure: https://github.com/jameysharp/predictable/ Hosted at https://fh.minilop.net/ Was on HPR 9 years ago, talking about Xorg! http://hackerpublicradio.org/eps.php?id=0825 Conversation notes Google Reader was terminated 2013-07-01, all subscription data permanently gone on 2013-07-15: https://www.google.com/reader/about/ Mastodon had Atom feeds with paging, but the feeds went away when OStatus went away: https://github.com/tootsuite/mastodon/pull/11247 HTML4 does indeed define the HTML link relations: https://www.w3.org/TR/html4/types.html#h-6.12 It has prev rather than the previous of RFC 5005, but mentions that some browsers support previous as an alias. HTML5 also defines the HTML link relations: https://html.spec.whatwg.org/multipage/links.html Here previous is a lower-case must for historical reasons. IANA manages the Registry of Link Relations: https://www.iana.org/assignments/link-relations/link-relations.xhtml It references RFC 5005 for the Section 4 relations, but not the Section 3 ones. RFC 5005 singles out its own Section 3 (Paged Feeds) as the best-effort, loose, discouraged model. Section 3: Therefore, clients SHOULD NOT present paged feeds as coherent or complete, or make assumptions to that effect. Section 4: Unlike paged feeds, archived feeds enable clients to do this without losing entries. I’m confused about it in the show, but the RFC is clear that an archived feed has one dynamic subscription document, which points to a chain of immutable archive documents. Back in 2002, Aaron Swartz published his joke MIME-header-based RSS 3: http://www.aaronsw.com/weblog/000574 The cultural context at the time and the rivalry between RSS 0.91+, RSS 1.0, RSS 2.0 and Atom deserves a show of its own. View the full article
  1. Load more activity