Sign in to follow this  
Followers 0

HPR - HPR1282: My Homemade Recumbent Bicycle

1 post in this topic

The Green ♲ Machine In this episode I discuss my experience building a Recumbent Bicycle from donor bikes. A couple of things I forgot to mention while recording the podcast. First of all I had to use tandem bicycle cables for the brakes and the rear derailleur because they had to be very long. I also forgot to talk about the time when I was in a panic that the rear triangle was a bit out of alignment with the front, such that it would make the bike turn a little bit to the left by default. I called Andrew Carson and asked him if there was anything I could do to fix it and his solution was just awesome. What he told me to do was to put a spare hub in the rear triangle to keep the seat- and chain stays from collapsing together, lay the frame on the ground with the front end propped up on a step or something, and then just stand on it, jumping up and down slightly on it if necessary until I could feel it bend back a little bit. This actually worked! It straightened the frame right out. :) Finally, the total cost for this project was under $300. The most expensive single part of it by far was the powder coat, which cost $120. Here are links to resources mentioned in the podcast or simply of general interest. Andrew Carson's Recycled Recumbents: Pretty nice video animation of Recycled Recumbent Mach 2 design and some photos of someone else's frame

My Project Blog My Project Gallery: Video testing pedals and frame fit:
Video of my First Ride!
Custom die-cut vinyl decals: Wikipedia article on Recumbent Bikes

Go to this episode


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0