JmanA9

List of Remaining 1AESS Offices

62 posts in this topic

BellSouth Telecommunications LLC. d/b/a AT&T Georgia is announcing that the Alcatel-Lucent 1AESS switch at the Atlanta Adamsville (ATLNGAAD69F) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ).  The cutover is scheduled for the 3rd Qtr 2016 and will not any sooner than August 1, 2016.

The purpose of this Network Disclosure is to provide information on the Atlanta Adamsville (ATLNGAAD69F) Transfer Project and Dial with Dial plans. AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a GENBAND G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ). The existing switch, ATLNGAAD69F, will be Dial with Dialed to a remote  switch, ATLNGAADRPA, during the 3rd Qtr 2016.

Currently, ATLNGAAD69F, homes on the ATLNGAEP01T (Atlanta East Point) for FG B, FG D and INTRA (LATA) tandem functions. 
The new ATLNGAADRPA remote location will also home on the ATLNGAEP01T for FG B, FG D, and INTRA (LATA) Tandem functions. 

Currently, ATLNGAAD69F currently homes on the ATLNGAEP01T (Atlanta East Point) for Local Tandem functions.
The new ATLNGAADRPA location will also home on ATLNGAEP01T (Atlanta East Point) for Local Tandem functions. 

ATLNGAAD69F switch currently homes on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem.
The new ATLNGAADRPA location will also home on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem. 

Existing CLLI code: ATLNGAAD69F

Existing Point Code: 252 013 004

New CLLI code: ATLNGAADRPA

New Point Code: 252 013 118 (same as host ATLNGAEPDSQ)

LATA: 438           NPA: 404              NXXs*: 472, 505, 691, 696, 699.

*NXXs valid as of 6/19/2015.

0

Share this post


Link to post
Share on other sites

Well, at least these are telling us where the 1As actually are. Heh.

 

We have a few months on most of these... Looks like some hardcore janning is going to be happening!

0

Share this post


Link to post
Share on other sites

BellSouth Telecommunications LLC. d/b/a AT&T Georgia is announcing that the Alcatel-Lucent 1AESS switch at the Atlanta Columbia Drive (ATLNGACD28F) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ).  The cutover is scheduled for the 3rd Qtr 2016 and will not occur any sooner than August 10, 2016.

The purpose of this Network Disclosure is to provide information on the Atlanta Columbia Drive (ATLNGACD28F) Transfer Project and Dial with Dial plans. 
AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a GENBAND G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ). 
The existing switch, ATLNGACD28F, will be Dial with Dialed to a remote switch, ATLNGACDRPA, during the 3rd Qtr 2016.

Currently, (ATLNGACD28F), homes on the NRCRGAMA02T (Norcross) for FG B, FG D, Local and INTRA (LATA) tandem functions. 
The new, (ATLNGACDRPA) remote location will also home on the NRCRGAMA02T (Norcross)  for FG B, FG D, Local and INTRA (LATA) Tandem functions. 

ATLNGACD28F switch currently homes on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem.
The new (ATLNGACDRPA) location will also home on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem. 

Existing CLLI code: ATLNGACD28F

Existing Point Code: 252 013 008

New CLLI code: , (ATLNGACDRPA)

New Point Code: 252 013 118 (same as host ATLNGAEPDSQ)

LATA: 438           NPA: 404              NXXs*: 284, 286, 288, 289, 534.

*NXXs valid as of 6/19/2015.

0

Share this post


Link to post
Share on other sites

BellSouth Telecommunications LLC. d/b/a AT&T Georgia is announcing that the Alcatel-Lucent 1AESS switch at the Waycross Main (WYCRGAMA28C) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ).  The cutover is scheduled for the 3rd Qtr 2016 and will not occur any sooner than September 1, 2016.

The purpose of this Network Disclosure is to provide information on the Waycross Main (WYCRGAMA28C) Transfer Project and Dial with Dial plans.
AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a GENBAND G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ).
The existing switch, WYCRGAMA28C, will be Dial with Dialed to a remote switch, WYCRGAMAPSA, during the 3rd Qtr 2016.

Currently, (WYCRGAMA28C), is transitioning to the Savannah Bull Street Tandem (SVNHGABS03T) for FG B, FG D, and INTRA (LATA) tandem functions as of April/2016.

The new, (WYCRGAMAPSA) remote location will also home on the Savannah Bull Street Tandem (SVNHGABS03T) for FG B, FG D, and INTRA (LATA) Tandem functions. 

The WYCRGAMA28C switch currently homes on the Savannah Bull Street Tandem (SVNHGABS03T) Operator Services Tandem.
The new (WYCRGAMAPSA) location will also home on the Savannah Bull Street Tandem (SVNHGABS03T) Operator Services Tandem. 

Existing CLLI code: WYCRGAMA28C 
Existing Point Code: 252 016 002
New CLLI code: , (WYCRGAMAPSA) 
New Point Code: 252 013 118 (same as host ATLNGAEPDSQ) 
LATA: 440    NPA: 912    NXXs*: 283, 284, 285, 287, 338.
*NXXs valid as of 6/19/2015.
 

0

Share this post


Link to post
Share on other sites

BellSouth Telecommunications LLC. d/b/a AT&T Louisiana is announcing that the Alcatel-Lucent 1AESS switch at Shreveport Queensboro (SHPTLAQBCG0) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the New Orleans Main C20 Switch (NWORLAMADS9).  The cutover is scheduled for the 4th Qtr 2016 and will not be implemented prior to October 1st 2016.

The purpose of this Network Disclosure is to provide information on the Shreveport Queensboro (SHPTLAQBCG0) Transfer Project and Dial with Dial plans. AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a GENBAND G6/G5 architecture hosted from the New Orleans Main C20 Switch (NWORLAMADS9). The existing switch, SHPTLAQBCG0, will be Dial with Dialed to a remote switch, SHPTLAQBPSA, during the 4th Qtr 2016 but not prior to October 1st 2016.

Currently, Shreveport Queensboro (SHPTLAQBCG0), homes on SHPTLAMA05T (Shreveport Main) for FG B, FG D and Intra Lata tandem functions.
The new SHPTLAQBPSA remote location will also home on SHPTLAMA05T (Shreveport Main) for FG B, FG D and Intra Lata tandem functions.

Currently Shreveport Queensboro (SHPTLAQBCG0) homes on SHPTLAMA05T (Shreveport Main) for Local tandem functions. 
The new, SHPTLAQBPSA, remote location will also home on SHPTLAMA05T (Shreveport Main) for Local tandem functions. 

Shreveport Queensboro (SHPTLAQBCG0) switch currently homes on the SHPTLAMA05T (Shreveport Main) Operator Services Tandem.
The new SHPTLAQBPSA location will also home on the SHPTLAMA05T (Shreveport Main) Operator Services Tandem. 

Existing CLLI code: Shreveport Queensboro (SHPTLAQBCG0)  
Existing Point Code: 252 152 006
New CLLI code: SHPTLAQBPSA 
New Point Code: 252-158-058 (same as host NWORLAMADS9) 
LATA: 486    NPA: 318    NXXs*: 525, 621, 631, 632, 635, 636, 638.
*NXXs valid as of 3/14/2016.
 

Issue Date: March 15, 2016

0

Share this post


Link to post
Share on other sites

This is a revision to Long Term NCN ATT20151202L.1 and is due to the date change on the ASR's from June 30th, 2016 to June 9th, 2016. The Alcatel-Lucent 1AESS end office switch at St. Louis Florissant (STLSMO40CG0) is being replaced by a Genband G6/G5 Line Gateway (STLSMO40RPA) hosted from the St. Louis Jefferson (STLSMO05DS2) host location.

The purpose of this Network Disclosure is to provide information on the St. Louis Florissant Wire Center (STLSMO40CG0) Transfer Project and Dial with Dial plans. 
AT&T Missouri is replacing the existing Alcatel-Lucent 1AESS end office with a new Genband G6/G5 Line Gateway. 
The existing switch, STLSMO40CG0, will be Dial with Dialed to a remote switch, STLSMO40RPA, in the 3rd quarter of 2016.  

Currently, STLSMO40CG0 homes on the STLSMO2101T (St. Louis Ladue) for FG B, FG D and INTRA (LATA) tandem functions.
The new STLSMO40RPA remote location will home on the STLSMO0501T for FG B Tandem, FG D Tandem, and INTRA (LATA) Tandem functions as does its future STLSMO05DS2 host office. 
This is a change between the homing arrangements for the STLSMO40CG0 and the new STLSMO40RPA. 

STLSMO40CG0 1AESS switch currently homes on the STLSMO05B2T (St. Louis Jefferson) Operator Services Tandem.
The new STLSMO40RPA location will also home on the STLSMO05B2T (St. Louis Jefferson) Operator Services Tandem. 

(If only word wrap was fucking adapted on this forum...)

Existing CLLI code: STLSMO40CG0 (1AESS)

Existing Point Code: 249-146-006

New CLLI code: STLSMO40RPA

New Point Code: 249 146 107 (same as host STLSMO05DS2)

LATA: 520     NPA: 314      

NXXs*: 830, 831, 837, 838, 839, 921, 972.

*NXXs valid as of 10/30/2015.

 

0

Share this post


Link to post
Share on other sites

BellSouth Telecommunications LLC. d/b/a AT&T Georgia is announcing that the Alcatel-Lucent 1AESS switch at the Carrollton Main (CRTNGAMA83C) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ)

The cutover is scheduled for the 4th Qtr 2016 and will not occur any sooner than October 5, 2016.

The purpose of this Network Disclosure is to provide information on the Carrollton Main (CRTNGAMA83C) Transfer Project and Dial with Dial plans. 
AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a 
GENBAND G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ). 
The existing switch, CRTNGAMA83C, will be Dial with Dialed to a remote switch, CRTNGAMARPA, during the 4th Qtr 2016

Currently, (CRTNGAMA83C), homes on the ATLNGAEP01T (Atlanta East Point) for FG B, FG D, Local and INTRA (LATA) tandem functions. 
The new, (CRTNGAMARPA) remote location will also home on the ATLNGAEP01T (Atlanta East Point) for FG B, FG D, Local and INTRA (LATA) Tandem functions. 

CRTNGAMA83C switch currently homes on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem.
The new (CRTNGAMARPA) location will also home on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem. 

Existing CLLI code: CRTNGAMA83C 
Existing Point Code: 252 013 073
New CLLI code: (CRTNGAMARPA) 
New Point Code: 252 013 118 (same as host ATLNGAEPDSQ) 
LATA: 438    NPA: See NXXs    NXXs*: 678-796; 770-214, 782, 816, 830, 832, 834, 836, 838.
*NXXs valid as of 6/19/2015.
 

0

Share this post


Link to post
Share on other sites

BellSouth Telecommunications LLC. d/b/a AT&T Georgia is announcing that The Alcatel-Lucent 1AESS switch at the Fairburn (FRBNGAEB96A) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ)

The cutover is scheduled for the 4th Qtr 2016 and will not occur any sooner than October 18, 2016.

The purpose of this Network Disclosure is to provide information on the Fairburn (FRBNGAEB96A) Transfer Project and Dial with Dial plans. 
AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a 
GENBAND G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ). 
The existing switch, FRBNGAEB96A, will be Dial with Dialed to a remote switch, FRBNGAEBRPA, during the 4th Qtr 2016.

Currently, FRBNGAEB96A, homes on the ATLNGAEP01T (Atlanta East Point) for FG B, FG D, Local and INTRA (LATA) tandem functions. 
The new, FRBNGAEBRPA remote location will also home on the ATLNGAEP01T (Atlanta East Point) for FG B, FG D, Local and INTRA (LATA) Tandem functions. 

FRBNGAEB96A switch currently homes on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem.
The new FRBNGAEBRPA location will also home on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem. 

Existing CLLI code: FRBNGAEB96A 
Existing Point Code: 252 013 036
New CLLI code: FRBNGAEBRPA 
New Point Code: 252 013 118 (same as host ATLNGAEPDSQ) 
LATA: 438    NPA: 770    NXXs*: 306, 774, 892, 964, 969.
*NXXs valid as of 6/19/2015.
 

0

Share this post


Link to post
Share on other sites

Posted (edited)

BellSouth Telecommunications LLC. Southwestern Bell Telephone Company d/b/a AT&T Texas is announcing that the Alcatel-Lucent 1AESS switch at Beaumont Terminal (BUMTTXTECG0) is being replaced with a GENBAND switch utilizing G6/G5 architecture.

 

The cutover is scheduled for the 4th Qtr 2016 and will not happen before November 4, 2016.

The purpose of this Network Disclosure is to provide information on the Beaumont Terminal  (BUMTTXTECG0) Transfer Project and Dial with Dial plans. 
AT&T Southwest is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband switch utilizing the G6/G5 architecture. 
The GENBAND switch is configured to accept trunking in TDM format only. 
The existing switch, BUMTTXTECG0 , will be Dial with Dialed to the new switch, BUMTTXTEPSA, during the 4th Qtr 2016. 

Currently, BUMTTXTECG0, homes on BUMTTXTE03T (Beaumont Terminal) for FG B and FG D tandem and also  INTRA (LATA) and Local tandem functions.
The new, BUMTTXTEPSA, switch will also home on the BUMTTXTE03T (Beaumont Terminal) for FG B, FG D, Intra and Local tandem functions. 

BUMTTXTECG0 currently homes on the BUMTTXTE03T (Beaumont Terminal) for Operator Services.
The new BUMTTXTEPSA switch will also home on the BUMTTXTE03T (Beaumont Terminal) for Operator Services. 

 

Existing CLLI code: BUMTTXTECG0 

Existing Point Code: 249 142 009

New CLLI code: BUMTTXTEPSA

New Point Code: 249 138 136 (same as Call Agent FTWOTXEDDC9)

LATA: 562     NPA: 409       NXXs*: 212, 456, 654, 757, 784, 785, 813, 827, 832, 833, 835, 838, 839, 841, 868, 880.

 

*NXXs valid as of 11/2/2015.

 

(For some inexplicable reason, someone who uploaded the .doc file listed it under the "Southeast" section. I've corrected this above.)

 

 

 

Edited by ramsaso
0

Share this post


Link to post
Share on other sites

Are there any that ARE NOT being replaced this year?

0

Share this post


Link to post
Share on other sites

Posted (edited)

So far, I think the Savannah 1A isn't. Also, one in Louisiana.

 

I was browsing through the Lucent/Alcatel-Lucent/Siemens website earlier, and noticed the 1AESS no longer comes up on the list of products they support. Maybe that's why AT&T is suddenly so eager to get rid of them? My understanding is their in-house ability to run them is pretty limited, and the few people that do know are probably not too far from retirement. There's probably a big financial incentive to let go of those guys, especially if they're looking to sell off some of their wireline footprint like they did in Connecticut..

 

https://support.alcatel-lucent.com/portal/web/support

Edited by ThoughtPhreaker
Forgot the link
0

Share this post


Link to post
Share on other sites

Posted (edited)

BellSouth Telecommunications LLC. d/b/a AT&T Louisiana is announcing that the Alcatel-Lucent 1AESS switch at Lafayette Vermillion (LFYTLAVMCG0) is being replaced with a GENBAND switch utilizing a G6/G5 architecture.

The cutover is scheduled for the 4th Qtr 2016 and will not be implemented prior to December 17 2016.

The purpose of this Network Disclosure is to provide information on the Lafayette Vermillion (LFYTLAVMCG0) Transfer Project and Dial with Dial plans. 
AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband switch utilizing a GENBAND G6/G5 architecture. 
The GENBAND switch is configured to accept trunking in TDM format only. 
The existing switch, LFYTLAVMCG0, will be Dial with Dialed to the new switch, LFYTLAVMPSA, during the 4th Qtr 2016.

Currently, Lafayette Vermillion (LFYTLAVMCG0), homes on LFYTLAMA0GT (Lafayette Main) for FG B, FG D and Intra Lata tandem functions.
The new LFYTLAVMPSA switch will also home on LFYTLAMA0GT (Lafayette Main) for FG B, FG D and Intra Lata tandem functions.

Lafayette Vermillion (LFYTLAVMCG0) switch currently homes on the LFYTLAMA0GT (Lafayette Main) Operator Services Tandem.
The new LFYTLAVMPSA location will also home on the LFYTLAMA0GT (Lafayette Main) Operator Services Tandem. 

Existing CLLI code: Lafayette Vermillion (LFYTLAVMCG0) 

Existing Point Code: 252-155-003

New CLLI code: LFYTLAVMPSA

New Point Code:   252-158-058  (same as host NWORLAMADC9)

LATA: 488     NPA: 337       NXXs*: 216, 273, 294, 295, 406, 713, 981, 983, 984, 988, 989, 991, 993

*NXXs valid as of 6/15/2016.

Edited by ramsaso
0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now