ramsaso

Members
  • Content count

    89
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by ramsaso

  1. The preferable way to dial in is by using a telephone line from your local telephone company.
  2. So under considerable deliberations, I've decided to LEASE a phone from QLT Consumer Lease Services. If you plan on leasing from them, keep in mind they will require your SSN as they run a credit check on you for new applicants. Their website is http://www.qltcls.com I've ordered the black Model 500 phone plus added on a 25" handset cord and a 7" line cord at no extra charge. The monthly charge for the phone is $4.45. I'll keep you guys posted on the bill and what the phone looks like just as soon as I receive it. I'll upload the recording of me interacting with the customer service representative soon.
  3. You forgot to add 1 in between 101-0288 and the number you dialed. If it goes through and supervises, you might as well pay ^$10 for a single minute casual dial call. Best to use 101-0321.
  4. 037T was just converted from old 4E to N4E dialed from Indonesia. 038T as of a few days ago has not been converted. Both of those tandems are located in Houston, TX, where I live. 037T.flac
  5. Here is what Thoughtphreaker is referring to (WARNING: This audio file has LOUD dial pulses. Please TURN DOWN your volume.). Thing thing 16bit.flac Also, in this recording, there is a feature/bug which allows one to experience erratic results from my switch (A 5ESS however, I don't know whether other 5ESSes will have this. The probable reason could be that I am getting service from a Digital Loop Carrier/Remote Terminal which also supplies me with DSL internet.) What I did was: 1. Dial 1177/1187 or *77/*87 (it doesn't matter really but dialing 1177 will get you dial tone without battery drop and 1187 will ringout continuously until after 3 minutes or so, which will cause battery drop and dial tone to be returned. TP thought that the AT&T NOC was remotely controlling my specific circuit and dropped me.) 2. Flash. (The ... 'thing', for lack of a better word, will do an erratic recall dial tone [beep beep bi-- ~~~~~~~~; ~ equals dial tone] and if you were to leave at that, I'll get a battery drop and another dial tone is being returned. After that, it just goes to the permanent signal recording and so on... a normal circuit so to say. 3. Dial your party/machine/equipment and so on. (Once your party finishes with the call and hangs up at the distant end, you will get a battery drop but instantly get another dial tone.)
  6. Here's my telephone bill from Southwestern Bell and I just turned 18 last month.
  7. Those must be one of those 5ESS tandems that AT&T's been using for a while now. Dialing that number, I get "713-9L" back.
  8. Whilst I like the list, you're forgetting the Abilene, TX 1AESS (325-675).
  9. Here are some rough recordings. Dialed directly though AT&T Long Distance/ Long Lines. +90 212 463 9999 - (Reorder?) 011 90 212 463 9999.mp3 +90 212 463 xxxx (privacy for the owner of the telephone number), +90 212 469 5896 (fax), +90 216 330 3190 (Çiya Sofrası, restaurant), +90 216 330 9800 (I don't know what this is?) Turkey Istanbul.mp3 It should be noted that the numbering system is similar to NANPA albeit with a 0 preceding the number dialed (i.e. 0216 330 9800). Area code 212 is the European side whilst area code 216 is the Asian side of Istanbul.
  10. BellSouth Telecommunications LLC. d/b/a AT&T Louisiana is announcing that the Alcatel-Lucent 1AESS switch at Lafayette Vermillion (LFYTLAVMCG0) is being replaced with a GENBAND switch utilizing a G6/G5 architecture. The cutover is scheduled for the 4th Qtr 2016 and will not be implemented prior to December 17 2016. The purpose of this Network Disclosure is to provide information on the Lafayette Vermillion (LFYTLAVMCG0) Transfer Project and Dial with Dial plans. AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband switch utilizing a GENBAND G6/G5 architecture. The GENBAND switch is configured to accept trunking in TDM format only. The existing switch, LFYTLAVMCG0, will be Dial with Dialed to the new switch, LFYTLAVMPSA, during the 4th Qtr 2016. Currently, Lafayette Vermillion (LFYTLAVMCG0), homes on LFYTLAMA0GT (Lafayette Main) for FG B, FG D and Intra Lata tandem functions. The new LFYTLAVMPSA switch will also home on LFYTLAMA0GT (Lafayette Main) for FG B, FG D and Intra Lata tandem functions. Lafayette Vermillion (LFYTLAVMCG0) switch currently homes on the LFYTLAMA0GT (Lafayette Main) Operator Services Tandem. The new LFYTLAVMPSA location will also home on the LFYTLAMA0GT (Lafayette Main) Operator Services Tandem. Existing CLLI code: Lafayette Vermillion (LFYTLAVMCG0) Existing Point Code: 252-155-003 New CLLI code: LFYTLAVMPSA New Point Code: 252-158-058 (same as host NWORLAMADC9) LATA: 488 NPA: 337 NXXs*: 216, 273, 294, 295, 406, 713, 981, 983, 984, 988, 989, 991, 993 *NXXs valid as of 6/15/2016.
  11. Here are some recordings of it. Apologies for the low volume. Additionally, the number dialed has been obscured so as to respect the privacy of the individual being dialed. On the "Ukraine Crossbar switch busy" file, you hear me dial directly through AT&T Long Distance to Ukraine (at 22¢ a minute!-that's already with an international long distance plan) by me dialing 011 380 542 33 xxxx. You will hear silence because the call takes some time to process through AT&T and then you will hear two clicks and the busy signal from the 4E (I believe from 121T? Well, that's where my calls are forwarded to whenever my international call can't get processed). On the "Ukraine Crossbar switch ringing" file, you, again, hear me dial directly through AT&T Long Distance to Ukraine with that same number again 30 seconds later. Again, you will hear silence as the call gets processed through AT&T. Then, a single pronounced click is heard and then you will hear the European ringing signal. On the 3rd and last file, the call is through a different number and you can hear 3 clicks in this one. Those files have not been filtered. Ukraine Crossbar switch busy.mp3 Ukraine crossbar switch ringing.mp3 Ukraine crossbar switch ringing 2.mp3 ------>Here are some more with normal volume levels (using an Olympus TP-8) dialing through my Western Electric 500 set. On the "bzzz" file, it is what it is. I presume that is from the crossbar switch. That "bzzzt" sound. The "not in service" recordings sound like they were routed to a digital switch or announcement machine since there is no clicks at all- both from the in-line coupler and from my TP-8. Ukraine crossbar switch ringing bzzz.mp3 Ukraine crossbar switch not in service (question mark).mp3 Ukraine crossbar switch not in service (question mark) 2.mp3 There's a goodie on the last "not in service" recording! That's +380 542 33 1126! (US and Canadian callers: 011 380 542 33 1126) That number does not supervise meaning that if you are calling it without an international long distance calling plan, you will NOT get charged, assuming your provider does/did not use cheap routes to call it.
  12. Frontier isn't the problem. Was the number local or long distance?
  13. scratchytcarrier: It's this thing I got from Radioshack.
  14. BellSouth Telecommunications LLC. Southwestern Bell Telephone Company d/b/a AT&T Texas is announcing that the Alcatel-Lucent 1AESS switch at Beaumont Terminal (BUMTTXTECG0) is being replaced with a GENBAND switch utilizing G6/G5 architecture. The cutover is scheduled for the 4th Qtr 2016 and will not happen before November 4, 2016. The purpose of this Network Disclosure is to provide information on the Beaumont Terminal (BUMTTXTECG0) Transfer Project and Dial with Dial plans. AT&T Southwest is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband switch utilizing the G6/G5 architecture. The GENBAND switch is configured to accept trunking in TDM format only. The existing switch, BUMTTXTECG0 , will be Dial with Dialed to the new switch, BUMTTXTEPSA, during the 4th Qtr 2016. Currently, BUMTTXTECG0, homes on BUMTTXTE03T (Beaumont Terminal) for FG B and FG D tandem and also INTRA (LATA) and Local tandem functions. The new, BUMTTXTEPSA, switch will also home on the BUMTTXTE03T (Beaumont Terminal) for FG B, FG D, Intra and Local tandem functions. BUMTTXTECG0 currently homes on the BUMTTXTE03T (Beaumont Terminal) for Operator Services. The new BUMTTXTEPSA switch will also home on the BUMTTXTE03T (Beaumont Terminal) for Operator Services. Existing CLLI code: BUMTTXTECG0 Existing Point Code: 249 142 009 New CLLI code: BUMTTXTEPSA New Point Code: 249 138 136 (same as Call Agent FTWOTXEDDC9) LATA: 562 NPA: 409 NXXs*: 212, 456, 654, 757, 784, 785, 813, 827, 832, 833, 835, 838, 839, 841, 868, 880. *NXXs valid as of 11/2/2015. (For some inexplicable reason, someone who uploaded the .doc file listed it under the "Southeast" section. I've corrected this above.)
  15. Here's an example of dialing 311. Also, it's an in-line coupler attached directly to my computer.
  16. Odd, it's still garbled text. Would you mind making a screenshot of MMTTY in action? I followed all the steps correctly and (look at the screenshot). I called 711. But when I call 713 837 0311 (it's city information for Houston), it decodes it somewhat successfully.
  17. Would you mind telling us the settings to let MMTTY decode TDD data/tones? I've been trying to access TDD numbers using HyperTerminal for example and it doesn't work. Me and TP tried to figure out how to decode them using MMTTY with the demodulator set to PLL and these settings: Mark: 1400 Hz / Shift: 400 Hz / VCO: 3.0 / Loop: 300 Hz yet it doesn't work.
  18. BellSouth Telecommunications LLC. d/b/a AT&T Georgia is announcing that The Alcatel-Lucent 1AESS switch at the Fairburn (FRBNGAEB96A) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ) The cutover is scheduled for the 4th Qtr 2016 and will not occur any sooner than October 18, 2016. The purpose of this Network Disclosure is to provide information on the Fairburn (FRBNGAEB96A) Transfer Project and Dial with Dial plans. AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a GENBAND G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ). The existing switch, FRBNGAEB96A, will be Dial with Dialed to a remote switch, FRBNGAEBRPA, during the 4th Qtr 2016. Currently, FRBNGAEB96A, homes on the ATLNGAEP01T (Atlanta East Point) for FG B, FG D, Local and INTRA (LATA) tandem functions. The new, FRBNGAEBRPA remote location will also home on the ATLNGAEP01T (Atlanta East Point) for FG B, FG D, Local and INTRA (LATA) Tandem functions. FRBNGAEB96A switch currently homes on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem. The new FRBNGAEBRPA location will also home on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem. Existing CLLI code: FRBNGAEB96A Existing Point Code: 252 013 036 New CLLI code: FRBNGAEBRPA New Point Code: 252 013 118 (same as host ATLNGAEPDSQ) LATA: 438 NPA: 770 NXXs*: 306, 774, 892, 964, 969. *NXXs valid as of 6/19/2015.
  19. BellSouth Telecommunications LLC. d/b/a AT&T Georgia is announcing that the Alcatel-Lucent 1AESS switch at the Carrollton Main (CRTNGAMA83C) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ) The cutover is scheduled for the 4th Qtr 2016 and will not occur any sooner than October 5, 2016. The purpose of this Network Disclosure is to provide information on the Carrollton Main (CRTNGAMA83C) Transfer Project and Dial with Dial plans. AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a GENBAND G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ). The existing switch, CRTNGAMA83C, will be Dial with Dialed to a remote switch, CRTNGAMARPA, during the 4th Qtr 2016 Currently, (CRTNGAMA83C), homes on the ATLNGAEP01T (Atlanta East Point) for FG B, FG D, Local and INTRA (LATA) tandem functions. The new, (CRTNGAMARPA) remote location will also home on the ATLNGAEP01T (Atlanta East Point) for FG B, FG D, Local and INTRA (LATA) Tandem functions. CRTNGAMA83C switch currently homes on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem. The new (CRTNGAMARPA) location will also home on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem. Existing CLLI code: CRTNGAMA83C Existing Point Code: 252 013 073 New CLLI code: (CRTNGAMARPA) New Point Code: 252 013 118 (same as host ATLNGAEPDSQ) LATA: 438 NPA: See NXXs NXXs*: 678-796; 770-214, 782, 816, 830, 832, 834, 836, 838. *NXXs valid as of 6/19/2015.
  20. This is a revision to Long Term NCN ATT20151202L.1 and is due to the date change on the ASR's from June 30th, 2016 to June 9th, 2016. The Alcatel-Lucent 1AESS end office switch at St. Louis Florissant (STLSMO40CG0) is being replaced by a Genband G6/G5 Line Gateway (STLSMO40RPA) hosted from the St. Louis Jefferson (STLSMO05DS2) host location. The purpose of this Network Disclosure is to provide information on the St. Louis Florissant Wire Center (STLSMO40CG0) Transfer Project and Dial with Dial plans. AT&T Missouri is replacing the existing Alcatel-Lucent 1AESS end office with a new Genband G6/G5 Line Gateway. The existing switch, STLSMO40CG0, will be Dial with Dialed to a remote switch, STLSMO40RPA, in the 3rd quarter of 2016. Currently, STLSMO40CG0 homes on the STLSMO2101T (St. Louis Ladue) for FG B, FG D and INTRA (LATA) tandem functions. The new STLSMO40RPA remote location will home on the STLSMO0501T for FG B Tandem, FG D Tandem, and INTRA (LATA) Tandem functions as does its future STLSMO05DS2 host office. This is a change between the homing arrangements for the STLSMO40CG0 and the new STLSMO40RPA. STLSMO40CG0 1AESS switch currently homes on the STLSMO05B2T (St. Louis Jefferson) Operator Services Tandem. The new STLSMO40RPA location will also home on the STLSMO05B2T (St. Louis Jefferson) Operator Services Tandem. (If only word wrap was fucking adapted on this forum...) Existing CLLI code: STLSMO40CG0 (1AESS) Existing Point Code: 249-146-006 New CLLI code: STLSMO40RPA New Point Code: 249 146 107 (same as host STLSMO05DS2) LATA: 520 NPA: 314 NXXs*: 830, 831, 837, 838, 839, 921, 972. *NXXs valid as of 10/30/2015.
  21. BellSouth Telecommunications LLC. d/b/a AT&T Louisiana is announcing that the Alcatel-Lucent 1AESS switch at Shreveport Queensboro (SHPTLAQBCG0) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the New Orleans Main C20 Switch (NWORLAMADS9). The cutover is scheduled for the 4th Qtr 2016 and will not be implemented prior to October 1st 2016. The purpose of this Network Disclosure is to provide information on the Shreveport Queensboro (SHPTLAQBCG0) Transfer Project and Dial with Dial plans. AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a GENBAND G6/G5 architecture hosted from the New Orleans Main C20 Switch (NWORLAMADS9). The existing switch, SHPTLAQBCG0, will be Dial with Dialed to a remote switch, SHPTLAQBPSA, during the 4th Qtr 2016 but not prior to October 1st 2016. Currently, Shreveport Queensboro (SHPTLAQBCG0), homes on SHPTLAMA05T (Shreveport Main) for FG B, FG D and Intra Lata tandem functions. The new SHPTLAQBPSA remote location will also home on SHPTLAMA05T (Shreveport Main) for FG B, FG D and Intra Lata tandem functions. Currently Shreveport Queensboro (SHPTLAQBCG0) homes on SHPTLAMA05T (Shreveport Main) for Local tandem functions. The new, SHPTLAQBPSA, remote location will also home on SHPTLAMA05T (Shreveport Main) for Local tandem functions. Shreveport Queensboro (SHPTLAQBCG0) switch currently homes on the SHPTLAMA05T (Shreveport Main) Operator Services Tandem. The new SHPTLAQBPSA location will also home on the SHPTLAMA05T (Shreveport Main) Operator Services Tandem. Existing CLLI code: Shreveport Queensboro (SHPTLAQBCG0) Existing Point Code: 252 152 006 New CLLI code: SHPTLAQBPSA New Point Code: 252-158-058 (same as host NWORLAMADS9) LATA: 486 NPA: 318 NXXs*: 525, 621, 631, 632, 635, 636, 638. *NXXs valid as of 3/14/2016. Issue Date: March 15, 2016
  22. BellSouth Telecommunications LLC. d/b/a AT&T Georgia is announcing that the Alcatel-Lucent 1AESS switch at the Waycross Main (WYCRGAMA28C) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ). The cutover is scheduled for the 3rd Qtr 2016 and will not occur any sooner than September 1, 2016. The purpose of this Network Disclosure is to provide information on the Waycross Main (WYCRGAMA28C) Transfer Project and Dial with Dial plans. AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a GENBAND G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ). The existing switch, WYCRGAMA28C, will be Dial with Dialed to a remote switch, WYCRGAMAPSA, during the 3rd Qtr 2016. Currently, (WYCRGAMA28C), is transitioning to the Savannah Bull Street Tandem (SVNHGABS03T) for FG B, FG D, and INTRA (LATA) tandem functions as of April/2016. The new, (WYCRGAMAPSA) remote location will also home on the Savannah Bull Street Tandem (SVNHGABS03T) for FG B, FG D, and INTRA (LATA) Tandem functions. The WYCRGAMA28C switch currently homes on the Savannah Bull Street Tandem (SVNHGABS03T) Operator Services Tandem. The new (WYCRGAMAPSA) location will also home on the Savannah Bull Street Tandem (SVNHGABS03T) Operator Services Tandem. Existing CLLI code: WYCRGAMA28C Existing Point Code: 252 016 002 New CLLI code: , (WYCRGAMAPSA) New Point Code: 252 013 118 (same as host ATLNGAEPDSQ) LATA: 440 NPA: 912 NXXs*: 283, 284, 285, 287, 338. *NXXs valid as of 6/19/2015.
  23. BellSouth Telecommunications LLC. d/b/a AT&T Georgia is announcing that the Alcatel-Lucent 1AESS switch at the Atlanta Columbia Drive (ATLNGACD28F) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ). The cutover is scheduled for the 3rd Qtr 2016 and will not occur any sooner than August 10, 2016. The purpose of this Network Disclosure is to provide information on the Atlanta Columbia Drive (ATLNGACD28F) Transfer Project and Dial with Dial plans. AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a GENBAND G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ). The existing switch, ATLNGACD28F, will be Dial with Dialed to a remote switch, ATLNGACDRPA, during the 3rd Qtr 2016. Currently, (ATLNGACD28F), homes on the NRCRGAMA02T (Norcross) for FG B, FG D, Local and INTRA (LATA) tandem functions. The new, (ATLNGACDRPA) remote location will also home on the NRCRGAMA02T (Norcross) for FG B, FG D, Local and INTRA (LATA) Tandem functions. ATLNGACD28F switch currently homes on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem. The new (ATLNGACDRPA) location will also home on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem. Existing CLLI code: ATLNGACD28F Existing Point Code: 252 013 008 New CLLI code: , (ATLNGACDRPA) New Point Code: 252 013 118 (same as host ATLNGAEPDSQ) LATA: 438 NPA: 404 NXXs*: 284, 286, 288, 289, 534. *NXXs valid as of 6/19/2015.
  24. BellSouth Telecommunications LLC. d/b/a AT&T Georgia is announcing that the Alcatel-Lucent 1AESS switch at the Atlanta Adamsville (ATLNGAAD69F) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ).  The cutover is scheduled for the 3rd Qtr 2016 and will not any sooner than August 1, 2016. The purpose of this Network Disclosure is to provide information on the Atlanta Adamsville (ATLNGAAD69F) Transfer Project and Dial with Dial plans. AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a GENBAND G6/G5 architecture hosted from the Atlanta East Point C20 switch (ATLNGAEPDSQ). The existing switch, ATLNGAAD69F, will be Dial with Dialed to a remote switch, ATLNGAADRPA, during the 3rd Qtr 2016. Currently, ATLNGAAD69F, homes on the ATLNGAEP01T (Atlanta East Point) for FG B, FG D and INTRA (LATA) tandem functions. The new ATLNGAADRPA remote location will also home on the ATLNGAEP01T for FG B, FG D, and INTRA (LATA) Tandem functions. Currently, ATLNGAAD69F currently homes on the ATLNGAEP01T (Atlanta East Point) for Local Tandem functions. The new ATLNGAADRPA location will also home on ATLNGAEP01T (Atlanta East Point) for Local Tandem functions. ATLNGAAD69F switch currently homes on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem. The new ATLNGAADRPA location will also home on the ATLNGABU02T (Atlanta Buckhead) Operator Services Tandem. Existing CLLI code: ATLNGAAD69F Existing Point Code: 252 013 004 New CLLI code: ATLNGAADRPA New Point Code: 252 013 118 (same as host ATLNGAEPDSQ) LATA: 438           NPA: 404              NXXs*: 472, 505, 691, 696, 699. *NXXs valid as of 6/19/2015.
  25. BellSouth Telecommunications LLC. d/b/a AT&T Florida is announcing that the Alcatel-Lucent 1AESS switch at the Jacksonville Riverside (JCVLFLRV38E) is being replaced with a GENBAND Remote utilizing a G6/G5 architecture hosted from the Orlando Magnolia C20 Switch (ORLDFLMADC3).  The cutover is scheduled for the 3rd Qtr 2016, but not prior to July 1, 2016. The purpose of this Network Disclosure is to provide information on the Jacksonville Riverside (JCVLFLRV38E) Transfer Project and Dial with Dial plans. AT&T Southeast is replacing the existing Alcatel Lucent 1AESS standalone end office switch with a new Genband remote switch utilizing a GENBAND G6/G5 architecture hosted from the Orlando Magnolia C20 Switch (ORLDFLMADC3). The existing switch, JCVLFLRV38E, will be Dial with Dialed to a remote switch, JCVLFLRVPSB, during the 3rd Qtr 2016. Currently, JCVLFLRV38E, homes on the JCVLFLCL05T (Jacksonville Clay) for FG B, FG D and Intra Lata tandem functions. The new JCVLFLRVPSB remote location will also home on the JCVLFLCL05T (Jacksonville Clay) for FG B, FG D and Intra Lata tandem functions. Currently JCVLFLRV38E homes on the JCVLFLCL55T (Jacksonville Clay) for Local tandem functions. The new, JCVLFLRVPSB, remote location will also home on the JCVLFLCL55T (Jacksonville Clay) for Local tandem functions. JCVLFLRV38E switch currently homes on the JCVLFLCL05T (Jacksonville Clay) Operator Services Tandem. The new JCVLFLRVPSB location will also home on the JCVLFLCL05T (Jacksonville Clay) Operator Services Tandem. Existing CLLI code: JCVLFLRV38E Existing Point Code: 252 034 015 New CLLI code: JCVLFLRVPSB New Point Code:   252 043 047 (same as host ORLDFLMADC3) LATA: 45204      NPA: 904              NXXs*: 381, 384, 387, 388, 389, 981. *NXXs valid as of 11/2/2015.