The Green ♲ Machine In this episode I discuss my experience building a Recumbent Bicycle from donor bikes. A couple of things I forgot to mention while recording the podcast. First of all I had to use tandem bicycle cables for the brakes and the rear derailleur because they had to be very long. I also forgot to talk about the time when I was in a panic that the rear triangle was a bit out of alignment with the front, such that it would make the bike turn a little bit to the left by default. I called Andrew Carson and asked him if there was anything I could do to fix it and his solution was just awesome. What he told me to do was to put a spare hub in the rear triangle to keep the seat- and chain stays from collapsing together, lay the frame on the ground with the front end propped up on a step or something, and then just stand on it, jumping up and down slightly on it if necessary until I could feel it bend back a little bit. This actually worked! It straightened the frame right out. :) Finally, the total cost for this project was under $300. The most expensive single part of it by far was the powder coat, which cost $120. Here are links to resources mentioned in the podcast or simply of general interest. Andrew Carson's Recycled Recumbents: https://sites.google...recumbents/home Pretty nice video animation of Recycled Recumbent Mach 2 design and some photos of someone else's frame My Project Blog http://jonsrecumbant.blogspot.com/ My Project Gallery: http://pics.jonkulp....php?/category/2 Video testing pedals and frame fit: Video of my First Ride! http://youtu.be/SDF-y6bd11U Custom die-cut vinyl decals: http://www.bikenames.com/ Wikipedia article on Recumbent Bikes http://en.wikipedia....cumbent_bicycle
Go to this episode
HPR - HPR1282: My Homemade Recumbent Bicycle
No replies to this topic
BinRev is hosted by the great people at Lunarpages!