1215 replies to this topic

[P(?)NYB(?)Y]

i'm hitting a busy when calling that first number you listed caustiq, any chance you got a recording?

[CerealKiller]

one of my friends called it and she got some company.

[Caustiq]

It was aired on Off The Hook the date of my post as I mentioned, so check their archives for a recording.

It is still busy as of 4:20am. It could be because the message was temporary, or even that they became aware "others" were calling in. It is all very mysterious.

i'm hitting a busy when calling that first number you listed caustiq, any chance you got a recording?

[d3fault]

Whoah Caustiq, long time no see man. (I would send a pm but.. meh)

[wingman358]

found this cool number the other day:

909-382-0101

its the number for the fixed base operator (on duty 24/7) at san bernadino international airport.

[typedeaf]

I found this number recently and I'm not sure what it is, (574-722-0099). A female recording says, "Enter the numbers you wish displayed.", followed by three short beeps. After you enter some numbers there's a longer beep, then the same recording saying "Thank you". After that, you are disconnected. Anyone know what this might be?

[hrddrv]

I found this number recently and I'm not sure what it is, (574-722-0099). A female recording says, "Enter the numbers you wish displayed.", followed by three short beeps. After you enter some numbers there's a longer beep, then the same recording saying "Thank you". After that, you are disconnected. Anyone know what this might be?

Sounds to me it is a beeper. You are probably calling a dr and he/she is getting pissed.

[ThoughtPhreaker]

205-206-9999 - Toggling 1A relays after the recording

478-212-0000 - Real, live, tone planty goodness!

214-946-9990 - Crosstalk during recording repetitions

If you decide to call the last number, be sure to call it during the daytime as this is when more customers tend to be on.

[unity]

Ha! 478-212-0000 rocks. It's awesome how you can hear the relays click in when it goes from busy to reorder.

And yes, I finially got around to calling it.

[tao_of_pi]

605-271-4327

I just came accross this number while scanning, and i'm wondering if any body can tell me what it is?
The number begins to ring but cuts to a busy signal then starts to ring again, it keeps going back and forth for about a minute.

Edited by tao_of_pi, 12 June 2006 - 09:05 PM.

[ic0n]

605-271-4327

I just came accross this number while scanning, and i'm wondering if any body can tell me what it is?
The number begins to ring but cuts to a busy signal then starts to ring again, it keeps going back and forth for about a minute.

I get a reorder.

[JmanA9]

605-271-4327

I just came accross this number while scanning, and i'm wondering if any body can tell me what it is?
The number begins to ring but cuts to a busy signal then starts to ring again, it keeps going back and forth for about a minute.

I get a reorder.

Me too.

[tao_of_pi]

thats weird, I called it again and got a recorder but on my third time it did the weird ring again. I cant get a good recording of it happening.

In this file it does it once at 18 seconds in to it. I'll try to get a better one

EDIT: i guess it is possible that it is just part of the ring and im just a noob

Attached Files

•  1.mp3   117.38K   50 downloads

Edited by tao_of_pi, 13 June 2006 - 02:32 PM.

[ic0n]

thats weird, I called it again and got a recorder but on my third time it did the weird ring again. I cant get a good recording of it happening.

In this file it does it once at 18 seconds in to it. I'll try to get a better one

EDIT: i guess it is possible that it is just part of the ring and im just a noob

In your recording I did hear a faint reorder while it was ringing. Myself when i call it I just get a reorder. I've tryed to double what you where saying but had no luck. If you don't mind me asking is this number in your local area??

Edited by ic0n, 13 June 2006 - 02:40 PM.

[Saint Peter]

Here's an interesting number that I found on AoH:

*******number removed*********

Edited by Saint Peter, 01 July 2006 - 07:07 AM.

[tao_of_pi]

thats weird, I called it again and got a recorder but on my third time it did the weird ring again. I cant get a good recording of it happening.

In this file it does it once at 18 seconds in to it. I'll try to get a better one

EDIT: i guess it is possible that it is just part of the ring and im just a noob

In your recording I did hear a faint reorder while it was ringing. Myself when i call it I just get a reorder. I've tryed to double what you where saying but had no luck. If you don't mind me asking is this number in your local area??

yea, I was scanning in my area code 605 (south dakota). It seems to go at random, sometimes it rings as normal, sometimes i get the recorder right away, and sometimes the recorder cuts in while it's ringing.

[P(?)NYB(?)Y]

saint peter: as far as commands go, you might consider using a combination of * followed by two numbers.

maybe.

i know nothing.

[Saint Peter]

I'll play with it more today. Pressing 1, 2, 3, or 4 gave "Error", but pressing * gave silence. I tried *1, *2, etc hoping to get a message like Sensaphones give but nothing.

Edited by Saint Peter, 01 July 2006 - 07:07 AM.

[ozlo]

I'll play with it more today. Pressing 1, 2, 3, or 4 gave "Error", but pressing * gave silence. I tried *1, *2, etc hoping to get a message like Sensaphones give but nothing.

*Imagines a national news story tomorrow about how a whole town had to be evacuated due to a "faulty sensor" at a local water treatment plant, causing some toxic chemical to leak back into the water supply.*

Be careful with that. There's manuals online for some of those remote monitoring systems if you know where to look. Remember that you could be turning the sensors on and off when you're messing with that.

[Pasta Sauce]

I'll play with it more today. Pressing 1, 2, 3, or 4 gave "Error", but pressing * gave silence. I tried *1, *2, etc hoping to get a message like Sensaphones give but nothing.

Try pressing *123 or *321 *741... That did something for me.
Also pressing # made it say "system ready"

Edited by Pasta Sauce, 20 June 2006 - 03:32 AM.